Slim Dutch Sailaway

 

 

 

‘SlimDutch’ sailaway narrowbeam barge.

STEELWORK:
10mm floor plates; 6mm hull sides; 4mm end bulkheads and
side plates to superstructure; 5mm roofsection;2" rubbing strakes continuously welded top and bottom. Tubular steel handrails along cabin length. Stern rail and stanchions along with column for single lever control. Tiller steering with swan neck, tiller bar and handle.

PRICE INCLUDES: diesel tank (80 gals approx with take off & return); gas locker; weed
hatch; anchor points; engine beds and drip tray; s
teel cants fore end; self draining stern deck; two barge style front rope bollards; two barge style rear rope bollards; rudder with balance plate and tiller; fender eyes to bow and stern of boat; centre handling ring; 6
large sacrificial anodes.

bow and stern door apertures with folded steel doors; sliding hatch on brass runners; side hatch in chosen position. porthole apertures.  All steelwork, inside and out, painted with 2 pack Hempel Paint.  Inside of hull and cabin painted with Hempel Hempadur. Outside of Cabin, decks, bilges and gunwales, painted with two coats of grey Hempel Hempadur. Hull exterior painted in Hempel Hempadur Black. Engine bay painted in light grey with Hempel Hempadur Integral steel fresh water tank in bows fully painted in 2 pack potable water tank paint.

Beta Marine Green Line 43 cyl Marine Diesel 43BHP arranged for keel cooling, c/w PRM gearbox , 2 off alternators, 55amp at 12v for engine, 90amp at 24v for domestics. Hospital silencer.  Fitting includes: Centaflex coupling; sump pump; remote greaser to stern tube;
1-1/2"
stainless steel prop shaft; 18 x 12”propeller; bilge pump.

ELECTRICS:
one 110amp hr battery to engine; panel with key start/stop; tachometer with hour counter; three
warning lights; audible alarm.

Concrete flagstone ballast laid on tantalised battens.  Waxoyl rust preventative to baseplate.

25 mm birch ply flooring laid on 70 x 50 tanalised bearers.

25mm sprayfoam insulation to all areas except floor complete with 25 x 38mm battens to accept lining material (not supplied)

5 no brass or chrome mushroom vents.

8 no 18” top opening single glazed portholes, 2 with obscured glass. Silver anodised or black powder coat to choice.

Please note that this is premium quality part complete boat and that the steelwork and
all associated works are carried
out to exactly the same standard and specification as our well respected fully fitted boats.

Example prices:

58ft craft - £47,824 including VAT at the current rate, ex works (Debdale Wharf
Marina, Leicestershire) and loading onto your provided transport

60ft craft – £49,473 including VAT at the current rate, ex works (Debdale Wharf Marina,
Leicestershire) and loading onto your provided transport

Other lengths available, prices on request

The length of the stern deck will be 8ft or 2440mm

A fully fitted craft of this design would start from £150,000 including VAT ex works
(Debdale Wharf Marina, Leicestershire), this price is very much a guide as it
all depends on your choices of finishes, equipment etc.